Rio L4-1.6L (2004)
10. Remove the bolts and nuts which couple the knuckle and the shock absorber.
11. Separate the front hub and the knuckle from the driveshaft.
Installation
1. Mount the front hub and knuckle to the driveshaft.
2. Mount the knuckle to the lower arm ballpoint and to the shock absorber.
3. Tighten the mounting bolts and nuts.
Tightening torque:
Knuckle to shock absorber 76 - 90 ft. lbs. (103 - 122 Nm, 10.5 - 12.5 kg-m)
Knuckle to lower arm ball-joint 40 - 50 ft. lbs. (54 - 68 Nm, 5.5 - 6.9 kg-m)
4. Install the disc rotor.
Tightening torque: 7.2 - 10.8 ft. lbs. (9.8 - 14.7 Nm, 1.0 - 1.5 kg-m)
