Rio L4-1.6L (2004)
Steering Gear: Service and Repair
Removal and Installation
Removal
1. Raise the front of the vehicle and support it with safety stands.
2. Remove wheel and tire
3. Pull out cotter pins, and remove nuts.
4. Separate the tie-rod from the knuckle arm with SST(0K670321019).
Notice: Replace nuts temporarily so that screw threads do not become damaged.
5. Remove the catalytic converter.
6. Disconnect the high pressure and return pipe. Then seal them with dry cloth to prevent entry of foreign materials.
7. Remove the intermediate shaft.
