Rio L4-1.6L (2004)
21. Use the Outer Box Torque Adapter to rotate the rack bushing until the hooked end of the retaining wire is aligned with the slot in the steering gear
housing.
22. Rotate the bushing.
23. Remove the rack from the right side of the steering gear.
24. Remove the bushing from the rack.
25. Remove the O-ring.
26. Use the Rack Oil Seal Remover to remove the seal by bottoming it into the rack with a plastic hammer.
27. Use the impact Slide Hammer and the Rack Oil Seal Remover to Dull the seal out of the rack.
28. Remove the mounting brackets and grommets.
Assembly
