Rio L4-1.6L (2004)
13. Use the Pinion Seal Replacer / Torque Adapter to install the seal.
14. Install the support yoke.
15. Install the spring.
16. Apply a sealant to the yoke plug threads. Install the yoke plug and tighten it to the specified torque.
Tightening torque: 14.5 ft. lbs. (19.6 Nm, 2 kg-m)
17. Loosen the support yoke.
18. Tighten the yoke plug with torque wrench to 43 inch lbs. (4.9 Nm, 50 kg-cm) three times, then return it 67.5 degrees.
19. Measure the pinion torque with the SST and spring scale.
Standard:
Center of rack ± 90°
6.9 - 11.3 inch lbs. (0.8 - 1.3 Nm, 8 - 13 kg-cm)
Scale reading: 800 - 1,300 kg (28.2 - 45.9 ounces)
20. If not within the specification, repeat steps 18 through 21.
