Rio L4-1.6L (2004)
8. Tap the boss with a hammer and rod to remove the spider assembly
CAUTION: Do not tap on the rollers.
NOTE: If the boot is to be reused, wrap the halfshaft splines with a tape before removing it from the shaft.
If necessary, remove the small boot clamp and the CV joint boot from the halfshaft.
INSPECTION
Check the following parts
1. Twisted or cracked driveshaft.
2. Worn splines.
3. Excessively loose joint.
4. Cracked or damaged boots.
ASSEMBLY
1. Install the tripod assembly on the halfshaft.