Rio5 L4-1.6L (2006)
2) Install the alternator brace (D) with the 2 bolts (A).
Tightening torque: 19.6 - 26.5 Nm (2.0 - 2.7 kgf.m, 14.5 - 19.5 ft. lbs.)
2. Install the timing belt idler.
3. Install the timing belt.
4. Install the water pump pulley.
5. Install the drive belts.
6. Tighten the water pump pulley bolts.
Tightening torque: 7.8 - 9.8 Nm (0.8 - 1.0 kgf.m, 5.8 - 7.2 ft. lbs.)
7. Fill with engine coolant.
8. Start engine and check for leaks.
9. Recheck engine coolant level.