Rio5 L4-1.6L (2006)
Air Bag: Service and Repair
Driver Airbag
AIR BAG MODULE (DRIVE SIDE)
AIR BAG MODULE AND CLOCK SPRING
REMOVAL
1. Disconnect the battery negative cable and wait at least three minutes before beginning work.
2. Remove the three airbag module mounting bolts.
3. Disconnect the horn connector (A).
4. Release the connector locking pin (B), then disconnect the driver airbag module connector (C).
CAUTION: The removed airbag module should be stored in a clean, dry place with the pad cover face up.
5. Remove the steering wheel and steering wheel column cover.
