Rio5 L4-1.6L (2006)
Brake Light Switch: Testing and Inspection
INSPECTION
1. Check the bushing for wear.
2. Check the brake pedal for bending or twisting
3. Check all parts for crack and wear.
4. Check the stop lamp switch.
1) Connect a circuit tester to the connector (1-2 terminals) of stop lamp switch, and check whether or not there is continuity when the plunger of
the stop lamp switch is pushed in and when it is released.
2) The stop lamp switch is in good condition if there is no continuity when the plunger (A) is pushed.
