Rio5 L4-1.6L (2006)
4. Install the push rod assembly.
INSTALLATION
1. Install the master cylinder under the instrument panel.
TORQUE: 9 - 14 Nm (90 - 140 kgf-cm, 6.5 - 10 ft. lbs.)
2. Apply specified grease to the clevis pin (A) and washer (B).
Grease: SAE J310 NLGI NO.2
3. Connect the push rod (A) to the clutch pedal.
4. Connect the flexible hose of the brake reserve tank to the master cylinder.
5. Pour the brake fluid.
6. Connect the clutch tube to the master cylinder.
TORQUE: 13 - 17 Nm (130 - 170 kgf-cm, 10 - 13 ft. lbs.)
7. Bleed the clutch system.