Rio5 L4-1.6L (2006)
INSPECTION
1. Check the select cable for proper operation and for damage.
2. Check the shift cable for proper operation and for damage.
3. Check the boots for damage.
4. Check the boots for wear, abrasion, sticking, restricted movement or damage.
5. Check for the weak or damaged spring.
INSTALLATION
1. Install the shift cable and select cable after locating the shift lever and select lever at the neutral position.
NOTE: When operating lever of body side, check secure operation of lever of transaxle side after assembly.
2. Install the snap pins (2EA) of transaxle side.
3. Install the shift lever assembly.
TORQUE: 9 - 14 Nm (90 - 140 kgf-cm, 6 - 9.5 ft. lbs.)
4. Install the shift cable and select cable to the shift lever side.
NOTE: Adjust the cable length with select cable adjuster (A) in N position before installing the center console.
