Rio Cinco L4-1.6L DOHC 16V (2003)
4. Measure crankshaft run-out at center journal. Replace crankshaft if it is not within specification.
Run-out: 0.0016 inch (0.04 mm)
5. Grind crankshaft only if there is visible scoring, or if out-of-round is excessive.
6. Only grind crankshaft amount necessary to correct condition.
7. If a crankshaft must be ground 0.020 inch (0.50 mm) or more, heat-treat crankshaft to ensure durability.
MAIN JOURNAL DIAMETER UNDERSIZES
CRANK PIN JOURNAL DIAMETER UNDERSIZES
MAIN BEARING AND CONNECTING ROD BEARINGS
1. Check main and connecting rod bearings for peeling, scoring and other damage.
MAIN BEARING SELECTION
