Rondo L4-2.4L (2007)
CAUTION:
^
Increase torque smoothly in order to achieve a clean break of the stop.
^
Do not exceed allowed torque.
^
Do not use electric or pneumatic tools.
TIRE FIT
CAUTION: Only use wheels designed to accommodate the TPMS sensor.
1. Lubricate the tire bead not the rim. Excessive lubrication should not be applied.
2. Start tire mounting approx. 5.9 in(15 cm) from valve.
3. Move the mounting tool away from the valve.
CAUTION: Avoid tire / tool contact with the valve.
4. Finish with mounting tool near to valve.
5. Perform inflation / pressure correction and then fit valve cap.
