Rondo V6-2.7L (2009)
(2) Ensure the locations of the timing marks for each sprocket.
8. Install the engine support bracket(A).
Tightening torque
58.8 - 68.6Nm(6.0 - 7.0kgf.m, 43.4 - 50.6lb-ft)
CAUTION:
-
Over torque can damage thread of cylinder block.
-
Be care the difference of upper 2 bolts and lower 1 bolt length.
9. Install the timing belt lower cover(A).
Tightening torque
9.8 - 11.8Nm(1.0 - 1.2kgf.m, 7.8 - 8.7lb-ft)
10. Install the crankshaft damper pulley(A).
Tightening torque
166.7 - 176.5Nm(17.0 - 18.0kgf.m, 123.0 - 130.2lb-ft)
11. Install the engine mounting bracket(A) and the ground cable(B).
Tightening torque
(A) : 63.7 - 83.4Nm(6.5 - 8.5kgf.m, 47.0 - 61.5lb-ft)
(B) : 7.8 - 11.8Nm(0.8 - 1.2kgf.m, 5.8 - 8.7lb-ft
