Rondo V6-2.7L (2009)
3. Install the engine support bracket
6 - 7kgf.m
58.8 - 68.6 Nm (6.0 - 7.0 kgf.m, 43.4 - 50.6Ib-ft)
NOTE:
After the removal, engine coolant can bo drained a little from that point(B) which is a matter of on importance.
CAUTION:
-
Over-torque can damage thread of cylinder block.
-
Be care the difference of upper 2 bolts and lower 1 bolt length.
4. Install drive belt(A).
5. Fill with engine coolant.
6. Start engine and check for leaks.
7. Recheck engine coolant level.