Rondo V6-2.7L (2009)
INSTALLATION
1. Install the control cable assembly from the transaxle.
2. Install the retainer and nuts.
TORQUE : 12-15Nm(1.2 - 1.5 kgf.m, 8.7-10.8lb-ft)
NOTE:
In case, install the crush pad and cowl cross bar.
3. Install the shift lever assembly (A).
TORQUE :
[A] 2-3Nm( 0.2 - 0.3 kgf.m, 1.4-2.2 lb-ft)
[B] 9-14Nm( 0.9 - 1.4 kgf.m, 6.5-10.1 lb-ft)
4. Install the sports mode connector (A).
5. Install the control cable (A).
6. Install the front console (A).
