Sedona V6-3.5L (2003)
11.
When "REPROGRAMMING COMPLETED" message is displayed, check the ABS warning lamp operation as directed.
12.
Turn ignition key to the "OFF" position for 20 seconds, start engine and check for normal operation.
MANUAL REPROGRAMMING
PROCEDURE:
13.
Turn ignition key to the "ON" position.
14.
Turn Hi-Scan Pro on, select "13. SEDONA ABS REPROGRAMMING" and press the "ENTER" key.
15.
Select "02. SEDONA ABS REPROGRAMMING [ERROR]" and press the "ENTER" key.