Sedona V6-3.5L (2003)
1.
Open hood and check for SC049 Campaign Completion Label on bulkhead above master cylinder.
^
If label exists, NO FURTHER ACTION IS REQUIRED.
^
If label DOES NOT EXIST, check the VIN's production date to confirm it falls within the campaign production range. After confirming the
production range, continue on to Replacement Procedure, as applicable.
Note:
Campaign completion must be verified on the Warranty Coverage Validation Inquiry screen, prior to performing repairs (Kia Standard System
[KSS] Main Menu - Option 3).
HUBCAP REPLACEMENT PROCEDURE:
2.
Raise vehicle on a hoist and remove the rear wheels.
3.
Remove both hubcaps and discard. Inspect exposed hub and bearing area on left and right sides for any sign of moisture, corrosion, grease
