Sedona V6-3.8L (2009)
1. NOTICE While reinstalling the motor, make sure that the white nylon support bearing projections are facing out towards the cover. Failure to do this
may result in noise and/or the gear damage.
Reinstall the motor making certain that the small nylon support bearing is properly installed as indicated above.
Reinstall the wiring observing proper polarity, otherwise the drive assembly will not work properly.
2. Reinstall the cover making sure the seal is properly in place, and that the proper length screws are installed in the proper positions. Do NOT pinch the
wiring between cover and housing!
