Sedona V6-3.8L (2009)
Power Sliding Door Switch: Testing and Inspection
Power Sliding Door Switch
INSPECTION
OVERHEAD CONSOLE DOOR SWITCH INSPECTION
1. Check the overhead console door switch input/output value by using the diagnostic tool. If the operation of overhead console door switch is
abnormal, check the IPM and replace.
2. When checking the overhead console switch operation, select a vehicle type and "IPM" menu.
3. Select a in panel module (IPM) and "CURRENT DATA".
4. Check the PSD PTG power control switch and PSD left/right switch.
5. Confirm that output is changed by the controlling ON/OFF of each switch on the overhead console.
DOOR HANDLE SWITCH INSPECTION
1. Check the power sliding door control module input/output value by using the diagnostic tool. If the operation of door control module is abnormal,
replace power sliding door control module.
2. When checking handle switch operation, select a vehicle type and "POWER SLIDING/TAIL GATE" menu.
3. Select the "POWER SLIDING DOOR" menu to check.
