Sedona V6-3.8L (2009)
Hood Latch: Service and Repair
HOOD LATCH REPLACEMENT
1. Detach the clips, then remove the under cover(A).
2. Detach the clips, then remove the hood latch cover(A).
3. Remove the hood latch (A) mounting bolts.
4. Remove the latch (A).
5. Disconnect the hood latch cable (A) and Remove the latch (B).
6. Installation is the reverse of removal.
NOTE:
-
Make sure the hood latch cable is connected properly.
-
Make sure the hood locks securely.