Sedona V6-3.8L (2009)
Front Subframe Mount: Technical Service Bulletins
Body/Frame - Subframe Bushing Replacement
Model: Sedona [VQ]
Group: Suspension System(21)
Number: KT2009110301
Date: Tuesday, November 03, 2009
Area: N. America
Subject
Procedure for Using Kias New Subframe Bushing
Remover and Installer Sedona (VQ) (SST - 018)
- Description
This Technical Service Bulletin provides instructions for using the bushing remover and installer. Tool bushings can be removed and installed without
removing the sub frame from the vehicle. The subframe will be lowered to access the top of the bushing and provide space for the tool.
The repair procedure consist of 3 main operations:
1. Removing The Subframe Bushing
2. Removing The Outer Sleeve
3. Installing the New Subframe Bushing
- Effective Vehicle Information
AFFECTED PRODUCTION RANGE:
All 2006 ~ 2010 Sedona (VQ) vehicles
- Service Procedure
Service Procedure Lowering the Subframe to Replace the Rear Bushings
1. Remove the Skid Plate under the front end of the vehicle.
