Sedona V6-3.8L (2009)
Power Door Lock Actuator: Testing and Inspection
Power Door Lock Actuators
Front Door Lock Actuator
INSPECTION
FRONT DOOR LOCK ACTUATOR
1. Remove the front door trim panel.
2. Disconnect the 4P connector from the actuator.
3. Check actuator operation by connecting power and ground according to the table. To prevent damage to the actuator, apply battery voltage only
momentarily.
Sliding Door Lock Actuator
INSPECTION
SLIDING DOOR LOCK ACTUATOR
1. Remove the sliding door trim panel.
2. Disconnect the 6P connector from the actuator.
3. Check actuator operation by connecting power and ground according to the table. To prevent damage to the actuator, apply battery voltage only
momentarily.
