Sedona V6-3.8L (2009)
7. Loosen the mounting bolts, then remove the seat back assembly (A).
8. Disconnect the protector (A) from the back frame, then remove the hog-ring clips (B).
9. Disconnect the seat pad (B) from the back frame (A).
10. After removing the hog-ring clips (A) on the front of seat back remove the seat back cover (B).
11. Installation is the reverse of removal.
a. To prevent wrinkles, make sure the material is stretched evenly over the cover (A) before securing the hog-ring clips (B)
