Sedona V6-3.8L (2009)
Seat Heater: Testing and Inspection
INSPECTION
1. Replacement of new part refer to Body group - front seat.
2. Check for continuity and measure the resistance between No.1 and NO.3 terminals.
Standard value: 2.45Ohms ± 10%(Cushion: 1.2Ohms ± 10%, Back: 1.2Ohms ± 10%)
3. Operate the seat warmer after connecting the 3P connector, and then check the thermostat by measuring the temperature of seat surface. Check for
continuity between the terminals after disconnecting the 3P connector.
Standard value : 28 ±3.5°C(Continuity), 37 ±3.0°C(Short)
