Sedona V6-3.8L (2009)
Power Door Lock Switch: Testing and Inspection
Power Door Lock Actuators
Front Door Lock Switch
INSPECTION
FRONT DOOR LOCK SWITCH
1. Remove the front door trim panel.
2. Disconnect the 6P connector from the actuator.
3. Check for continuity between the terminals in each switch position according to the table.
Sliding Door Lock Switch
INSPECTION
SLIDING DOOR LOCK SWITCH
1. Remove the rear door trim panel.
2. Disconnect the 6P connector from the actuator.
3. Check for continuity between the terminals in each switch position according to the table.