Sedona V6-3.8L (2009)
(6) Disconnect the LH front oxygen sensor connector (A).
(7) Disconnect the LH ignition coil connector (A), injector connector (B), condenser connector (C) and ground (D), and remove the wiring
harness protector (E).
(8) Disconnect the LH CMPS (A) and oil pressure switch connector (B).
(9) Remove the ETC bracket (A).
(10) Disconnect the water hoses (B) from ETC.
(11) Disconnect the PCV hose (C).
(12) Disconnect the brake vacuum hose.
(13) Remove the surge tank stay (A).
