Sedona V6-3.8L (2009)
(6) The firing and/or blow out test should not be performed within 30 minutes after the timing chain cover was assembled.
23. Install the water pump pulley (A).
Tightening torque :
7.84 - 9.80N.m(0.8 - 1.0kgf.m, 5.78 - 7.23lb-ft)
24. Install the drive belt auto tensioner (A).
Tightening torque :
Bolt(B):81.39 - 85.32N.m (8.3 - 8.7kgf.m, 60.03 - 62.93lb-ft)
Bolt(C):17.64 - 21.56N.m (1.8 - 2.2kgf.m, 13.02 - 15.91lb-ft)
25. Install the drive belt idler (A).
Tightening torque :
52.92 - 57.82N.m(5.4 - 5.9kgf.m, 39.06 - 42.67lb-ft)
26. Lower the engine assembly by using the jack.
27. Using SST (09231-3C100), install timing chain cover oil seal.
