Sedona V6-3.8L (2009)
(3) Install the surge tank stay.
Tightening torque :
27.44 - 31.36N.m (2.8 - 3.2kgf.m, 20.25 - 23.14lb-ft)
(4) Connect the brake vacuum hose.
(5) Connect the PCV hose (C).
(6) Connect the water hoses (B) to the ETC.
(7) Install the ETC bracket (A).
(8) Connect the LH CMPS connector (A) and oil pressure switch connector(B).
(9) Install the wiring harness protector (E) and connect the LH ignition coil connector (A), injector connector (B), condenser connector (C) and
ground (D).
(10) Connect the LH front oxygen sensor connector (A).
