Sedona V6-3.8L (2009)
32. Install the engine mounting bracket (A).
Tightening torque :
88.3 - 107.9N.m (9.0 - 11.0kgf.m, 65.1 - 79.6lb-ft)
33. Install the coolant reservoir tank.
34. Remove the jack from the upper oil pan.
35. Install lower oil pan.
(1) Using a gasket scraper, remove all the old packing material from the gasket surfaces.
(2) Before assembling the oil pan, the liquid sealant TB1217H should be applied on oil pan.
Bead width :
2.5mm(0.1in.).
But marked area(*) to be 5.0mm(0.2in.)
CAUTION:
1) Make clean the sealing face before assembling two parts.
2) Remove harmful foreign matters on the sealing face before applying sealant.
3) When applying sealant gasket, sealant must not be protruded into the inside of oil pan.
4) To prevent leakage of oil, apply sealant gasket to the inner threads of the bolt holes.
(3) Install the lower oil pan (A).
Tightening torque :
9.80 - 11.76N.m (1.0 - 1.2kgf.m, 7.23 - 8.68lb-ft)
36. Install the side cover.
