Sedona V6-3.8L (2009)
Driver/Vehicle Information Display: Description and Operation
DESCRIPTION
The trip computer displays information related to driving, including compass, distance to empty, elapsed time, average fuel consumption and outside
temperature on the display. To change the function as described below, push the MODE button lesser than 2 sec. Distance to empty -> elapsed time ->
average fuel consumption -> outside temperature -> OFF.
NOTE:
Compass is always displayed except for OFF mode.
OPERATION
1. COMPASS
The vehicle compass displays the direction (8 directions) where the vehicle is heading. Compass is displayed when driving.
2. DISTANCE TO EMPTY
This mode indicates the estimated distance to empty based on the current fuel in the fuel tank and the amount of fuel delivered to the engine. The
meter's working range is from 30 to 1500 miles (50 to 1500 km) by the 1km or 1mile.
When the remaining distance is below 30 miles (50km), a blinking "----" symbol will be displayed.
The unit can be changed by press the reset button for more than 4 sec. If the unit of distance to empty is changed, the unit of average fuel
consumption is changed together.
3. ELAPSED TIME
This mode indicate the total time traveled since the last driving time reset while the engine is running.
Press the reset button for less than 4sec, clears the driving time to zero.
4. AVERAGE FUEL CONSUMPTION
This mode calculates the average fuel consumption from the total used fuel and the distance. The meter's working range is from 0.0 to 99.9
L/100km or MPG(mile per gallon).
Press the reset button for less than 4 sec, when the average fuel consumption is being displayed, clears the average fuel consumption to "- -" until
the vehicle is moved to 0.3 miles(500m).
