Sedona V6-3.8L (2009)
Power Steering Line/Hose: Service and Repair
Repair Procedures
REPLACEMENT
1. Drain the power steering fluid.
2. Disconnect the pressure tube (A) and suction tube (B) from the power steering oil pump.
Tightening torque Nm (kgf.m, lb-ft):
55 - 65 (4.5 - 5.5, 40 - 47)
3. Disconnect the pressure tube (A) and return tube (B) from the valve body housing.
Tightening torque Nm (kgf.m, lb-ft):
12 - 18 (1.2 - 1.8, 9 - 13)
4. Remove the brackets of the pressure tube and hose from the sub-frame.
5. Remove the bracket of the return tube and hose.
6. Remove the under cover and then loosen the oil cooler tube bracket bolts.
NOTE:
Be sure to connect between a tube and a hose as shown in the illustration.