Sedona V6-3.8L (2009)
MANUAL MODE PCM UPGRADE PASSWORDS
6. When the GDS tool reports that the ECM upgrade has been successfully completed, click OK, turn OFF the ignition key, and wait at least 10 seconds
before attempting to start the engine.
7. Check for Diagnostic Trouble Codes using the GDS and erase any DTCs stored such as EPS, ESC, and TPMS. Due to CAN BUS multiple DTCs
maybe set during reprogramming.
8. Start the engine to confirm proper operation of the vehicle.
AFFECTED PRODUCTION RANGE
SERVICE ACTION WARRANTY CLAIM INFORMATION
NOTICE
VIN Inquiry data for this repair is provided for tracking purposes only. Kia retailers should reference SA059 when accessing the WebDCS system.
