Sedona V6-3.8L (2009)
: 1.9 - 2.7 kgf.m (18.6 - 26.5 Nm, 13.7 - 19.5 lb.ft)
4. Install the new seatback cover.
5. Install the seat assembly, then connect the Side Airbag (SAB) harness connector.
6. Recline and slide the front seat forward fully, make sure the harness wires are not pinched or interfering with other parts.
7. Reconnect the battery negative cable.
8. After installing the Side Airbag (SAB), confirm proper system operation:
A. Turn the ignition switch ON; the SRS indicator light should be turned on for about six seconds and then go off.
