Sedona V6-3.8L (2009)
13. When the end of the circlip comes out of the notched hole of the housing rack cylinder, turn the rack stopper (A) clockwise and remove the circlip.
CAUTION:
Be careful not to damage the rack.
14. When the end of the circlip comes out of the notched hole (A) of the housing rack cylinder, turn the rack stopper (B) counterclockwise and remove
the circlip.
CAUTION:
Be careful not to damage the rack.
15. Remove the rack bushing and rack from the rack housing.
16. Remove the O-ring(A) from the rack bushing (B).
17. Remove the oil seal (B) from the rack bushing (A).
18. Remove the valve body (A) from the valve body housing (B) with a soft hammer.
