Sedona V6-3.8L (2009)
4. Remove the rear upper arm ball joint self-locking nut (A) and the cotter pin.
5. Remove the rear upper arm ball joint (A) by using the special tool(09568-4A000).
6. Remove the rear upper arm (A) mounting nut (B) from the cross member.
INSTALLATION
1. Install the rear upper arm (A) mounting nut (B) to the cross member.
Tightening torque Nm (kgf.m, lb-ft) : 160 - 180 (16 - 18, 115.7 - 130.2)