Sedona V6-3.8L (2009)
1. Place bushing in subframe
2. Assemble a nut on the end of the threaded rod along with the 2 washers and thrust washer.
Insert the threaded rod through the deep end of the large cup, then through the new bushing and finally through the subframe and install plate.
Thread the second nut on the top of the threaded rod.
3. Using hand tools, tighten the lower nut to press the bushing into the subframe.
If the nut runs too far up the threaded rod, you can use the
Small Cup as a spacer.
