Sedona V6-3.8L (2009)
CAUTION:
The gas coming out is harmless, but be careful of chips that may fly up when drilling. Be sure to use face shield and safety goggles.
Repair Procedures
REMOVAL
1. Loosen the wheel nuts slightly.
Raise the rear of the vehicle, and make sure it is securely supported.
2. Remove the rear wheel and tire (A) from rear hub (B).
CAUTION:
Be careful not to damage the hub bolts (C) when removing the rear wheel and tire (A).
3. Remove the rear shock absorber assembly mounting bolts (A) and nut (B) from the baby.
4. Remove the rear shock absorber assembly nut (B) from the rear knuckle, then remove the shock absorber assembly (A).
5. Remove the rear shock absorber bracket bolt (A).
INSTALLATION
