Sedona V6-3.8L (2009)
7. Remove the trailing arm bracket (A) mounting bolts (B) from the body.
8. Remove the connecting bolt (B) between the trailing arm (A) and the bracket.
INSTALLATION
1. Install the connecting bolt (B) between the trailing arm (A) and the bracket.
Tightening torque Nm (kgf.m, lb-ft) : 160 - 180 (16 - 18, 115.7 - 130.2)
2. Install the trailing arm bracket (A) mounting bolts (B) from the body.
Tightening torque Nm (kgf.m, lb-ft) : 80 - 110 (8 - 11, 57.9 - 79.5)
3. Install the trailing arm (A) mounting nuts (B) from the knuckle.
Tightening torque Nm (kgf.m, lb-ft) : 80 - 100 (8 - 11, 57.9 - 72.3)