Sedona V6-3.8L (2009)
8. Using a plastic hammer, disconnect the driveshaft (A) from the front hub assembly (B).
9. Removal of the driveshaft [RH].
A. Remove the heat protector (A).
B. Remove the inner shaft bearing bracket assembly mounting bolts (A).
Tightening torque Nm (Kgf.m, lb-ft):
Gasoline: 50 - 65 (5.0 - 6.5, 36 - 47)
10. Insert pry bar (C) between the transaxle case (B) and driveshaft joint (A), separate driveshaft from the transaxle.
