Sedona EX V6-3.5L (2002)
3.
Remove two screws securing RKE receiver, disconnect electrical connector and remove RKE receiver.
4.
Connect electrical connector to new RKE receiver and secure with two screws.
5.
Reinstall upper glove compartment.
PROGRAMMING PROCEDURE:
1.
Open hood and locate data link connector near battery.
2.
Use a jumper to connect pin 5 to pin 17.
3.
Turn ignition switch to the on position.
4.
Press the lock button on the first transmitter two times.
5.
Press the lock button on the second transmitter two times.
6.
Turn ignition switch to the off position and remove the key.
7.
Remove jumper from the data link connector.
8.
Check for lock and unlock operation of both transmitters.
AFFECTED PRODUCTION RANGE:
Sedona model with production dates prior to 1/1 6/02.
