Sedona EX V6-3.5L (2002)
Removal
1. Remove the rear wheel hub assembly from the vehicle.
2. Remove the sensor rotor with SST(OK670 990 AA0).
Replacement
1. Install a sensor rotor with SST(OK201 660 001).
Number of sensor rotor teeth: 54
2. Install the rear wheel hub assembly.
3. Check the air gap between the face of the wheel speed sensor and the top surface of the tone-wheel.
Air gap: 0.0039 - 0.048 inch (0.1 - 1.2 mm)
4. Road test vehicle to ensure proper operation of the base and ABS brake system.