Sedona EX V6-3.5L (2002)
Camshaft Gear/Sprocket: Technical Service Bulletins
Engine - Camshaft and Cam Gear Designations
SOURCE: Kia PitStop
TITLE: Camshaft and Cam Gear Designations
APPLIES TO: Sedona
SERVICE TIP:
The cam gears and camshafts are incorrectly identified in the Sedona Service Manual. Please refer to the following information when servicing.
Cam Gears
-
Right bank (bank 1) intake and exhaust gears are interchangeable and are stamped 3.5R
-
Left bank (bank 2) intake gear is stamped 3.5L
-
Left bank (bank2) exhaust gear (with cam sensor ring) is stamped 3.5D
Camshafts
-
Right bank (bank 1) camshafts are stamped at the rear of the engine, J on intake cam and H on exhaust cam
-
Left bank (bank 2) camshafts are longer than bank 1 cams, and are stamped at the front of engine, I on intake cam and E on exhaust cam.
