Sedona EX V6-3.5L (2002)
20.
Transfer upper alternator bracket to new alternator, leave bolt loose.
21.
Install alternator into place. Start lower mounting bolt before installing alternator onto lower mounting bracket.
22.
Install upper alternator bracket bolts, brace bolt and torque all alternator mounting bolts.
23.
Install new drive belt and adjust tension.
24.
Reconnect alternator electrical connections.
25.
Reinstall engine cooling fans in reverse order of removal.
26.
Reinstall upper radiator support, using caution not to pinch hood release cable at left radiator mount.
27.
Reattach harness retaining clips and hood release cable retainer to upper radiator support.
28.
Reinstall bolts securing hood latch to upper radiator support.
29.
Reconnect horn connectors.
30.
Reinstall fresh air duct.
31.
^
If vehicle has OEM battery, continue on to Battery Cover Installation below. If vehicle has a replacement battery, reconnect negative battery
cable and continue on to ECM Reprogram Procedure.
BATTERY COVER INSTALLATION:
* NOTICE
Battery cover will only fit OEM battery.
