Sedona EX V6-3.5L (2002)
5.
Connect reprogramming adapter power supply cable to Hi-Scan Pro power supply adapter.
6.
Connect power supply adapter to vehicle battery.
7.
Connect Hi-Scan Pro to under hood DLC located near vehicle battery.
* NOTICE
Any interruptions will prevent proper reprogramming. Make sure connectors are securely and completely inserted. Leave ignition key in the "ON"
position during reprogramming.
8.
Turn ignition key to the "ON" position.
9. Turn Hi-Scan Pro on and select "14. SEDONA 3.5D 02103MY BATTERY DRAIN" and press the "ENTER" key.
10.
Select "01. SEDONA 02103MY BATT. DRAIN [AUTO]" and press the "ENTER" key.