Sedona EX V6-3.5L (2002)
12.
After "REPROGRAMMING COMPLETED!" message is received, disconnect all connectors and turn ignition key to the "OFF" position. Close
DLC cover. Proceed to step 17.
* NOTICE:
If the reprogramming did NOT complete properly or was interrupted, repeat the process using the following procedure.
13.
From the initial screen select option 01: "SEDONA 3.5L COLD HESITATION and press the "ENTER" key.
14.
Select option 02: "SEDONA 3.5L COLD HESITATION (ERROR)" and press the "ENTER" key.
