Sedona EX V6-3.5L (2002)
Air Flow Meter/Sensor: Diagnostic Aids
How to Check For Malfunction
Inspection of parts
When removed, each part should be carefully inspected for malfunction, deformations, damage, or other problems.
How to Check For Continuity
Inspection
1. When a tester is used to check for continuity or to measure voltage, insert tester probe from wire harness side.
2. Check terminals of waterproof connectors from connector side because they cannot be accessed from harness side.
NOTE:
a. Use a fine wire to prevent damage to the terminal
b. Do not damage the terminal when inserting the tester lead.
How to Check Terminals
