Sedona EX V6-3.5L (2002)
Note the TPS voltage value.
Voltage:______________________________
9.
Close throttle and record the TPS voltage.
Voltage:______________________________
Closed throttle voltage should be 30-65mV less than the voltage noted in step eight (8)
Adjust TP Sensor and repeat test as required.
10.
Tighten TP Sensor screws as required. Torque is 12-18 inch lbs. Verify switching of throttle switch with throttle plate movement.
11.
Install engine cover.
12.
Clear any stored DTC which may have set during service procedure. Remove GDS tool from vehicle.
WARRANTY CLAIM INFORMATION