kia Workshop Repair Guides

Kia Workshop Service and Repair Manuals

All Other Service Bulletins for Multiple Junction Connector:|3EL004 > < Electrical - Adjusting Electrical Terminal Pin Tension
Page 1
background image

Power Seat Switch: All Technical Service Bulletins
Starting/Charging - Battery Discharge

SOURCE: Kia PitStop

TITLE: Battery Discharge

APPLIES TO: Sedona EX

SERVICE TIP:

Some Sedona EX models with production dates between 3/12/02 and 5/7/02 may experience battery discharge if the vehicle has not been driven for a
few days. A possible cause of this discharge may be a faulty seat lumbar adjustment switch. Use the following procedure to determine if this switch is the
cause:

-

With doors closed and all accessories off, disconnect battery negative cable.

-

Connect ammeter (vom) negative lead to battery negative post and ammeter (vom) positive lead to negative battery cable. Give reading a few
seconds to stabilize.

-

If battery current draw is more than 30 milliamps, disconnect driver's seat lumbar switch and retest current draw.

-

If battery current draw drops below 30 milliamps with lumbar switch disconnected, replace lumbar switch (P/N 1K56E 88 104).

All Other Service Bulletins for Multiple Junction Connector:|3EL004 > < Electrical - Adjusting Electrical Terminal Pin Tension