Sedona EX V6-3.5L (2002)
Overdrive Switch: Testing and Inspection
Operation inspection
1. Turn ignition switch ON.
2. Verify that the O/D indicator light is not illuminated. Depress O/D switch and verify that the O/D indicator light illuminates.
3. If O/D indicator light does not operate, continue with inspection of voltage test.
Voltage inspection
1. Remove center panel.
2. Turn ignition switch ON.
3. Measure voltage at O/D switch connector.
4. If not as specified, check for continuity at O/D switch.
5. Install center panel.
Continuity inspection
1. Disconnect negative battery cable.
2. Disconnect O/D switch connector.
