Sephia GS Sedan L4-1.8L (1997)
ABS Main Relay: Service and Repair
ABS Main Relay
Located At LH Rear Corner Of Engine Compartment
REMOVAL
1. Disconnect negative battery cable.
2. Slide main relay (nearest ABS pump motor) off of its bracket. Removal can be eased by inserting a small flat-bladed screwdriver between back of
bracket and relay mounting slot.
3. Pull relay out of its harness connector.
INSTALLATION
1. Insert the relay into its connector, being certain that it is fully seated.
2. Slide the relay's connector onto its bracket. Push down far enough to latch the connector to its bracket.
3. Reconnect the battery cable.
